ORIGINAL RESEARCH
Evaluating Noise Sources in a Working Environment when Disintegrating Rocks by Rotary Drilling
Patrik Flegner 1  
,  
Ján Kačur 1  
,  
Milan Durdán 1  
,  
Marek Laciak 1  
 
 
More details
Hide details
1
Technical University of Kosice, Faculty BERG, Institute of Control and Informatization of Production Processes, Košice, Slovak Republic
CORRESPONDING AUTHOR
Patrik Flegner   

Institute of Control and Informatization of Production Processes, Faculty BERG, Technical University of Košice, B. Nemcovej 3, 04001 Košice, Slovak Republic
Online publish date: 2019-05-17
Publish date: 2019-07-08
Submission date: 2018-06-18
Final revision date: 2018-08-28
Acceptance date: 2018-09-04
 
Pol. J. Environ. Stud. 2019;28(5):3711–3720
KEYWORDS
TOPICS
ABSTRACT
The mechanical disintegration of rocks plays an irreplaceable role in the exploration, preparation, and mining of minerals resources in geological and engineering surveys. When disintegrating by rotary drilling, the disintegration tool interacts with the rock and converts the mechanical energy to thermal energy caused by the friction of the disintegration tool on the rock. Consequently, undesirable accompanying sounds occur in the process of disintegration of the rock by drilling. These include vibrations that show up in the working environment as noise. The noise generated during rotary drilling can be scanned as an acoustic signal. From above, it is possible to say that noise and vibration have a direct negative impact on the machinery personnel, on the working environment and on the environment. At present, research in the field of the disintegration of rocks by rotary drilling is directed at analyzing the factors affecting the disintegration of rocks and the working environment. This article analyzes experimental measurements carried out on a horizontal drilling tool. Measured vibroacoustic signals in different operating modes will be processed in the time, frequency, and time-frequency domains.
eISSN:2083-5906
ISSN:1230-1485