ORIGINAL RESEARCH
Variations in Hydraulic Properties of Sendimentary Rocks Induced by Fluid Injection: The Effect of Water Pressure
Zhen Huang 1, 2, 3  
,  
Xiaozhao Li 1  
,  
Shijie Li 2  
,  
Kui Zhao 2  
,  
Hongwei Xu 2  
 
 
More details
Hide details
1
School of Earth Sciences and Engineering, Nanjing University, Nanjing, China
2
School of Resources and Environment Engineering, Jiangxi University of Science and Technology, Ganzhou, Jiangxi, China
3
State Key Laboratory for GeoMechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou, Jiangsu, China
Online publish date: 2018-09-07
Publish date: 2018-12-20
Submission date: 2018-01-03
Final revision date: 2018-02-02
Acceptance date: 2018-02-11
 
Pol. J. Environ. Stud. 2019;28(2):647–655
KEYWORDS:
TOPICS:
ABSTRACT:
Water inrush during the excavation of mines or mining is one of the great challenges in underground engineering work in China. To prevent and/or mitigate water inrush, natural sedimentary rocks with low-permeability, which include the mudstone and sandstone found in underground excavations, are exceptional materials for geological barriers. The aim of this work is to therefore investigate the hydraulic properties of sedimentary rocks in a deep tunnel, with the application of high-pressure packer tests (HPPTs). The experimental results indicate that both the mudstone and sandstone are low permeability. The measured injection pressure-flow rate (P-Q) can be divided into two phases: Phase I – a flow that is Darcian with a linear relationship, and Phase II – changes in the flow pattern with an exponential relationship. Water injection primarily triggers fracture dilation, and then results in an evident increase in hydraulic conductivity. The hydraulic conductivity versus water pressure distribution phase can be considered as three flow phases: the initial flow phase, initiation of flow communication phase, and non-steady state flow phase. The calculated original fracture apertures in mudstone and sandstone are, respectively, 0.37 and 0.33 mm. Furthermore, a conceptual model with two phases of fracture aperture versus water pressure is proposed.
CORRESPONDING AUTHOR:
Zhen Huang   
Nanjing University, Zhu Gongshan Building, Xianlin Avenue, No.163 of Xianlin Avenue, Qixia District, 210023 Nanjing, China
eISSN:2083-5906
ISSN:1230-1485